이미지

ICS Repeater(SOHO)

The SOHO ICS repeater features a compact size and low power consumption to provide robust performance for expanded indoor coverage. It uses digital processing technology to expand the isolation of the built-in I/O antennas.


The built-in antennas allow for a Plug & Play function that generously expands indoor signal coverage when the repeater is stationed at or near a window. No installation is necessary, just plug in the power supply.


The SOHO ICS repeater automatically analyzes the propagation environment and adjusts the system in to the optimum settings in real time. An LED window displays the status of the repeater.


Boasting a robust performance, compact size and very low power consumption, CS's SOHO ICS repeater supports FDD or TDD, and Single Band or Dual Band.

Product Line

- Dual Band Type
     TB-3103

- Single Band Type
     TB-3033
     TB-3093

ICS Repeater(OUTDOOR)

The Outdoor ICS repeater has a powerful digital processor that extends the isolation of the I/O antennas 10 times the amount of an Indoor repeater.


The Outdoor ICS repeater provides a gain of 20dB or more and a power output of 20W to provide wide outdoor coverage. The solid enclosure of the Outdoor repeater provides waterproof performance, with a rating above IP65.


The outdoor ICS repeater automatically analyzes the propagation environment, compensates for lack of isolation of the antenna and adjusts the system in to the optimum settings in real time. Operators can also monitor the status information in real time.


CS's Outdoor ICS repeater offers a very wide Cancellation Window performance, providing robust performance even in extreme outdoor fading environments. It provides optimal service quality with minimal installation.

Product Line

- PSL-ICS20

Digital RF Repeaters INDOOR

The Digital RF Indoor Repeater provides top-tier mobile phone and lightning speed data services in hard-to-reach coverage areas inside buildings where signals from the base station do not extend to.

Product Line

- TRIO-MD

Digital RF Repeaters INDOOR

The CS RF Home Repeaters are powerful yet have a compact design allowing it to fit anywhere in the household. An LED display indicates radio reception sensitivity and output levels. Dynamic in its features, the low power consumption make these repeaters a great option for operators looking for a cost-effective solution for their subscribers.

Product Line

- Speed-WL
- WHR/GHR

Introduction

The TB-3103 is a SOHO ICS repeater providing simultaneous coverage extension for Band 1 and Band 5.

Network Diagram

It is most effective to install the TB-3103 near the window of the room. The TB-3103 has a built-in antenna features Plug & Play functionality to easily expand indoor coverage. No installation is needed, just plug in the power. The repeater also features an option to use only one band to reduce power consumption. An external antenna can be connected with an RF cable if needed.

Features

- Feedback Cancellation : Extend the isolation between the input and output antennas to more than 10 dB by removing the output antenna signal flowing into the input antenna


- Easy Installation: Receive service within 2 minutes once the power is turned on. No installation needed.


- Low Power Consumption: Expand coverage area at low cost and low power


- Good Design: A trendy design for home decor, can be installed in an office or a home.

Specification

- Service Frequency : UMTS Band 1 and 5. Dual Band service available.

- System Gain : 70dB(DL/UL both)

- Output Level : +15dBm(DL), +16dBm(UL)

- Power Consumption : <30W

- Weight : 2.8kg

- Dimension : 175mm x 190mm x 105mm

Introduction

The TB-3033 is an ICS repeater for SOHO and provides coverage extension for UMTS Band 1.

Network Diagram

It is the most effective to install TB-3033 in the window of the room. The TB-3033 has a built-in antenna, which provides Plug & Play function that can easily expand the indoor coverage instantly if the repeater is stationed at the window and only the power supply is supplied. It doesn’t need additional installation and if required, an external antenna can be connected with an RF cable.

Features

Feedback Cancellation: It is possible to obtain an effect of expanding the isolation between the input and output antennas by 10 dB or more by removing the output antenna signal input to the input antenna.
Easy Installation : If power is supplied to the repeater without any installation work, the service can be provided within 1 to 2 minutes.
Low Power Consumption: Because power consumption is low, you can effectively extend coverage in a small space at a low cost.
Good Small Design : It is compact and provides a pleasant design that is easy to install at home or the small office.
.

Specification

- Service Frequency : UMTS Band 1

- System Gain : 70dB(DL/UL both)

- Output Level : +15dBm(DL), +16dBm(UL)

- Power Consumption : <15W

- Weight : 1.2kg

- Dimension : 130mm x 130mm x 80mm

Introduction

TB-3093 is an ICS repeater for SOHO and provides coverage extension for UMTS Band 5.

Network Diagram

It is the most effective to install TB-3093 in the window of the room.
The TB-3093 has a built-in antenna, which provides Plug & Play function that can easily expand the indoor coverage instantly if the repeater is stationed at the window and only the power supply is supplied. It doesn’t need additional installation and if required, an external antenna can be connected with an RF cable.

Features

Feedback Cancellation: It is possible to obtain an effect of expanding the isolation between the input and output antennas by 10 dB or more by removing the output antenna signal input to the input antenna.
Easy Installation : If power is supplied to the repeater without any installation work, the service can be provided within 1 to 2 minutes.
Low Power Consumption: Because power consumption is low, you can effectively extend coverage in a small space at a low cost.
Good Small Design : It is compact and provides a pleasant design that is easy to install at home or the small office.

Specification

- Service Frequency : UMTS Band 5

- System Gain : 70dB(DL/UL both)

- Output Level : +15dBm(DL), +16dBm(UL)

- Power Consumption : <15W

- Weight : 1.8kg

- Dimension : 156mm x 156mm x 85mm

Introduction

PSL-ICS20 is an outdoor ICS repeater and provides coverage extension for UMTS Band 28.

UMTS Band 28 is used as a disaster network frequency in many countries including Korea.

Network Diagram

The PSL-ICS20 is most effective when installed in an outdoor tower or pole, and can amplify outdoor coverage by directly amplifying the base station signal.
The PSL-ICS20 detects the isolation between the antennas and automatically adjusts the system gain to provide stable coverage expansion regardless of changes in the surrounding radio environment.

Features

- Feedback Cancellation: Extend the isolation between the input and output antennas to up to 20 dB by removing the output antenna signal flowing into the input antenna

- Easy Installation: Automatically analyzes the propagation environment, compensates for lack of isolation of the antenna and adjusts the system in to the optimum settings in real time. This ensures optimal service quality with minimal installation time.

- Robust ICS function: CSS ICS algorithm with wide Cancellation Window provides stable coverage even with sudden changes in the propagation environment.

Specification

- Service Frequency : UMTS Band 28

- System Gain : 105

- Output Level : 20W(43dBm)

- Power Consumption : <50W

- Weight : <15kg

- Dimension : 170mm x 515mm x 156mm (Excluding protrusions, excluding MTG fixed part)

Introduction

The TRIO-MD Mid-size Repeater improves coverage areas in In-Building poor wireless environments which is unavoidable in normal base station designs.
By supporting CDMA, WCDMA, LTE and LTE-A together in a single equipment, this repeater improves the efficiency of an operator's network designs and the infrastructure construction of the site owner.
The system accomodates multiple operators simultaneously.
Very environmental friendly and supports 3-Band simultaneous service.

Network Diagram

Digital Repeater Block Diagram

Features

Flexible-Band Width

Filter property can be changed by FW update

3 Band – 5 Service

Built-in ANT isolation check function

Built-in AGC, ALC, Shutdown function

Built-in remote control and monitoring function via wireless modem

Provides service in two blocks in the band Waveform analysis through built-in Spectrum Analyzer

Introduction

The SPEED home repeater extends signal coverage to shadow areas indoors to provide excellent mobile service.
This home-type repeater is installed and operated between the base station and the terminal, and is intended to expand service areas where the radio wave of the base station has insufficient reach.
Ideal for coverage in small offices, apartments, or single-family homes.
Very environmental friendly and supports 3-Band simultaneous service.

Network Diagram

Specification

Introduction

Network Diagram

Features